 |
|
 |
|
|
|
|
since 02/23/2008:
| Currently online: |
5 |
| Total visitors: |
231,224 |
| Total page views: |
3,340,613 |
| Visitors today: |
78 |
| Visitors yesterday: |
353 |
| Page views today: |
1,598 |
|
|
|
 |
|
 |
|
Maybach DSH "Säge" (saw-vehicle) |
around 1934-1937, Germany |
engines/performance |
| engines: |
| years |
cyl./valv. |
compr. |
displacement |
power |
|
specific |
fuel |
torque |
|
| 34-37: |
i6/12V |
6.3:1 |
5184cc.(316ci) |
130-hp |
@3200rpm |
25.1 hp/l |
2x2bbl |
?lb-ft. (?Nm) |
@?rpm |
|
|
performance: |
| engine |
topspeed |
0-50mph |
0-62mph |
0-100mph |
0-124mph |
1/4mile |
mileage (US-gallon) |
| 5.2l130hp: |
135kph/84mph |
?s |
?s |
?s |
?s |
?s@?mph/?kph |
19.0-21.0 l/100km | 11.2-12.4 mpg |
|
tyres/transmission |
| tyres front/rear: |
7.00-20 |
| transmission/drive wheel: |
5-speed Maybach-DSG/RWD |
dimensions/weight |
| length x width x height: |
? x ? x ? mm (? x ? x ? in) |
| wheelbase - tread f/r: |
3735 mm - 1520/1520 mm (147.0 in - 59.8/59.8 in) |
| some calculations: |
base aera: ? m² (? sq.ft.) - frontal aera: ? m² (? sq.ft.) - LxWxH: ? m³ (? cu.ft.) |
| aerodynamics: |
coefficient of drag (cd): ? - drag area: ? m² / ? sq.ft. |
| weight: |
2700 kg (5952 lb) |
| power/weight-ratio: |
20.8 kg/hp (45.8 lb/hp) 48 hp/ton |
price/production |
| base-price: |
? |
| production: |
around 50 (all DSH) |
|
DSH stood for Doppel-Sechs-halb (= double six-half).
It shared the body with the Zeppelin models, but had a smaller engine to make the car cheaper.
This car was modified to a saw after the WWII, the original engine was removed and replaced by a 2cylinder-engine.
|
|
Pictures taken in 2008 in the "Technikmuseum Sinsheim" in Sinsheim, Germany |
| |
|
 |
|
 |
|
 |
|
| |
|
|
|
|
|
|
|
573 visit(s) of this page |
© copyright 2003-2012 Kai S. Gruszczynski - optimized for:
Firefox 8 and later, Internet Explorer 8.x/9.x, Opera 11.x, best for a resolution of 1024x768 or better
all pictures are taken by the webmaster, exceptions are marked. reproduction only with permission.
|
